RCBuilderRadio-Controlled Aircraft Models including Bronco [OV-10], Black Widow [P-61], NorthStars, Superfortress [B-29], and R/C GamesB-36 Making Top Canopy out of Fiberglass- (Found June 19, 2008 ) B-36 Making Top Canopy out of Fiberglass B-36 Making Top Canopy out of Fiberglass B-36 Making Top Canopy out of Fiberglasshttp://members.aol.com/aljoajo/rcb/B36-35.htm B-36 Vertical Stabilizer- (Found June 19, 2008 ) B-36 Vertical Stabilizer B-36 Vertical Stabilizer B-36 Vertical Stabilizerhttp://members.aol.com/aljoajo/rcb/B36-34.htm B-36 Measurements, Making Rear Fuselage Hatch and Weigh In- (Found June 19, 2008 ) B-36 Measurements, Making Rear Fuselage Hatch and Weigh In B-36 Measurements, Making Rear Fuselage Hatch and Weigh In B-36 Measurements, Making Rear Fuselage Hatch and Weigh Inhttp://members.aol.com/aljoajo/rcb/B36-33.htm B-36 Making Wing Fairing- (Found June 19, 2008 ) B-36 Making Wing Fairing B-36 Making Wing Fairing B-36 Making Wing Fairinghttp://members.aol.com/aljoajo/rcb/B36-32.htm B-36 Fuselage Templates and Fuselage Wrap- (Found June 19, 2008 ) B-36 Fuselage Templates and Fuselage Wrap B-36 Fuselage Templates and Fuselage Wrap B-36 Fuselage Templates and Fuselage Wraphttp://members.aol.com/aljoajo/rcb/B36-31.htm STOLEN PLANE ALERT- (Found June 19, 2008 ) STOLEN PLANE ALERT STOLEN PLANE ALERT !On Tues., April 29, 2008 several RC Models were stolen in the greater San Francisco Bay Area. For a list of the planes with pictures, please ViewDownload this STOLEN PLANES flyer.http://home.comcast.net/~rc-models/FLYER.doc Test Fit Wing Saddle and Stabilizer- (Found June 19, 2008 ) B-36 Test Fit Wing Saddle and Stabilizer B-36 Test Fit Wing Saddle and Stabilizer B-36 Test Fit Wing Saddle and Stabilizerhttp://members.aol.com/aljoajo/rcb/B36-29.htm Cut Rear Fuselage Angle- (Found June 19, 2008 ) B-36 Cut Rear Fuselage Angle B-36 Cut Rear Fuselage Angle B-36 Cut Rear Fuselage Anglehttp://members.aol.com/aljoajo/rcb/B36-28.htm Foam Fill the Fuselage- (Found June 19, 2008 ) B-36 Foam Fill the Fuselage B-36 Foam Fill the Fuselage 1- Hot Wire Cutting Hole the Length of Fuselage 2- Cutting Balsa Sides, Top and Bottom to Size 3- Test Fitting Wood Tube 4- Tack Glue Box DO NOT glue to foam 5- Coat Wood and Inside of Fuselage with Epoxy 6- Mark Wing and Horizontal Stabilizer Openings onto Box 7- Wrap Foam Plug with Waxpaper Slide plug into hole to keep wood pressed against foam until epoxy dries B-36 Foam Fill the Fuselage...http://members.aol.com/aljoajo/rcb/B36-27.htm Prepare to Cut Hole Through Fuselage- (Found June 19, 2008 ) B-36 Prepare to Cut Hole Through Fuselage B-36 Prepare to Cut Hole Through Fuselage B-36 Prepare to Cut Hole Through Fuselagehttp://members.aol.com/aljoajo/rcb/B36-26.htm |